Tile Roof Replacement in Oakland Park, FL — Clay & Concrete, Expert Installers
Roofing Network replaces clay and concrete tile roofs across Broward, Miami-Dade, and Palm Beach County. Specialist installation, hurricane-rated materials, full permit and inspection service. Free quote in 15 minutes.
Get Your Free Quote
⚡ We respond within 15 minutes
Install Time
3–5 Days
Warranty
30yr+ Tile
Includes
Tile Roofing Specialists
South Florida's Tile Roof Replacement Experts — 30+ Years
Tile roof replacement in South Florida is a specialized trade — and most roofing contractors aren't equipped to do it properly. Tile roofs require dedicated experience in mortar setting, tile matching, underlayment systems approved for Florida's rainfall rates, and the structural assessment needed to ensure your home's framing can support the tile system's weight. Roofing Network has been replacing clay and concrete tile roofs across South Florida since 1993, with every project permitted, inspected, and built to Florida Building Code.
South Florida's climate presents specific challenges for tile roofing. The intense UV degrades mortar at accelerating rates, saltwater air attacks the calcium in concrete tiles, and hurricane-season winds create uplift loads that improperly set tiles cannot resist. We source tile from manufacturers whose products carry Miami-Dade NOA approval and install every tile to the manufacturer's published fastening requirements — so your roof holds in the next major storm.
Key Benefits
• Tile Matching Service: We maintain an extensive tile inventory and supplier network to match discontinued or hard-to-find profiles for partial replacements and repairs.
• Structural Assessment Included: We assess your roof framing load capacity before every tile replacement — clay barrel tile can add 9–12 lbs/sq ft over asphalt shingles. Surprises on install day are not in our vocabulary.
• NOA-Approved Systems Only: Every tile we install carries Miami-Dade Notice of Acceptance (NOA) — required across all three South Florida counties we serve.
Tile Type | Profile | Weight | Lifespan | Best For |
|---|---|---|---|---|
Concrete Flat Tile | Low-profile, modern look | Medium (9 lbs/sq ft) | 30–50 yrs | Modern homes, HOA communities, budget-conscious |
Concrete Barrel (S-Tile) | Classic Spanish barrel | Medium-Heavy (10 lbs/sq ft) | 40–50 yrs | Mediterranean & Spanish architecture, most South Florida HOAs |
Clay Barrel Tile | Traditional round barrel | Light-Medium (7–9 lbs/sq ft) | 50–100 yrs | High-value homes, historic properties, premium installations |
Clay S-Tile | Low-profile clay | Light-Medium (8 lbs/sq ft) | 50–75 yrs | Estate homes, coastal properties requiring color retention |
Why Choose Us
4 Reasons Roofing Network is South Florida's Top Choice
30+ Years of Tile Experience
01
Tile roofing has been a Roofing Network specialty since our founding in 1993. Our crews have installed and replaced clay barrel, clay S-tile, concrete flat, and concrete profile tile on everything from small bungalows to multi-million-dollar estates throughout South Florida. We know the nuances of every tile system used in this market.
Tile Sourcing & Matching
02
Discontinued tile profiles are one of the most common headaches in South Florida tile replacement. Our supplier network spans 20+ manufacturers and distributors — we've successfully matched tile profiles going back 30+ years. Before we quote a partial replacement, we confirm match availability or present alternatives that complement your existing profile.
Full Structural Review
03
Clay tile weighs 9–12 lbs per square foot — more than triple a shingle roof. Before every tile replacement, we assess your roof framing's capacity to support the system. If framing upgrades are needed, we document and scope them before the project begins. No job stops mid-install for surprise structural work on our watch.
Permit & Inspection Every Time
01
Tile roof replacement permits in South Florida require submitted product NOA documentation, framing plans if structural work is involved, and a county inspection. We manage the entire process — submission, tracking, and inspector scheduling. Every project closes with a signed Certificate of Completion.
Tile Options — What We Recommend for South Florida
Tile selection in South Florida is driven by four factors: your roof framing load capacity, your HOA's approved profile list, the tile system's Florida Building Code and NOA approval status, and your budget. Below is a comparison of the most commonly installed systems in our service area.
Tile Type | Profile | Weight | Lifespan | Best For |
|---|---|---|---|---|
Concrete Flat Tile | Low-profile, modern look | Medium (9 lbs/sq ft) | 30–50 yrs | Modern homes, HOA communities, budget-conscious |
Concrete Barrel (S-Tile) | Classic Spanish barrel | Medium-Heavy (10 lbs/sq ft) | 40–50 yrs | Mediterranean & Spanish architecture, most South Florida HOAs |
Clay Barrel Tile | Traditional round barrel | Light-Medium (7–9 lbs/sq ft) | 50–100 yrs | High-value homes, historic properties, premium installations |
Clay S-Tile | Low-profile clay | Light-Medium (8 lbs/sq ft) | 50–75 yrs | Estate homes, coastal properties requiring color retention |
$30,000–$56,000 for a typical 2,000 sq ft home
Tile roof replacement is the premium-priced residential roofing system in South Florida — and its 50–100 year service life makes it the lowest-cost system over time. Cost is driven primarily by tile type (clay costs more than concrete), profile complexity (barrel requires more labor than flat), framing upgrades if needed, and project size. A detailed, itemized aerial quote is available within 15 minutes of your request. Call 954-588-8734 or submit our form — no site visit required before getting your number.
License Number
CCC1329271 / CGC1517295
30+ Years in Business
South Florida Experts
Our Process
How Your Tile Roof Replacement Works
No surprises. No handoffs to a subcontractor. The same team from quote to completion.
01
Free Quote & Tile Assessment
Aerial measurement delivers your tile replacement quote within 15 minutes. We also assess your existing tile profile for matching availability, and your roof framing for load capacity — both included at no cost before any commitment.
Tile Sourcing & Permit Submission
We confirm tile match or present alternatives, submit permits to the county building department with full NOA documentation, and place the material order. Tile lead time is typically 7–14 business days from permit approval.
02
03
Tear-Off & Deck Preparation
All existing tile, mortar, and underlayment removed. Decking inspected; any damaged sections replaced. Two-layer SBS modified bitumen underlayment installed (required by Florida Building Code for tile applications) — this is the real waterproofing layer of a tile roof.
Tile Installation
County inspector reviews and approves. We complete your wind mitigation report (OIR-B1-1802). Tile manufacturer warranty documentation and Roofing Network's 5-year workmanship warranty issued in writing. We walk the completed roof with you before the job is closed.
04
05
Final Inspection & Warranty
County inspector reviews and approves. We complete your wind mitigation report (OIR-B1-1802). Tile manufacturer warranty documentation and Roofing Network's 5-year workmanship warranty issued in writing. We walk the completed roof with you before the job is closed.
FAQ
Tile Roof Replacement— Common Questions
Everything you need to know about roofing in South Florida. Can't find your answer? Call us directly.
You May Also Need
